Charles in Dallas repaired his boat deck using Fiberglass Warehouse products.  The old deck had rotted out and need to be replaced.

First he tore out the old plywood deck.  He checked the stringer to make sure they were still good.

He installed a new plywood deck.

And covered it with knitted fiberglass, GP resin and ISO/NPG Gel coat.  The boat deck looks great.

Here is a list of the materials and supplies that Charles used.

Type 1708 Knitted Fabric, 25.3oz. X 50", +/-45 17 oz w/ 3/4oz. Mat - Yards (#155170850)

Orca 200 P16A Ortho General Purpose Laminating Resin - 5 Gallon (#050220020213)

MEKP Catalyst - 4 oz (#0814)

Deluxe Aluminum Roller - 1" x 6" (#67416A)

Orca Guard White 1100 Gel Coat - Gallon (#05711000010)

Orca Guard White 1100 Gel Coat WITH WAX - Gallon (#05711000110)

Charles added sand to the White Gel coat with wax to give the surface a non-skid texture. He is extremely please with the job he did.  This was his first ever fiberglassing attempt.  

By Dallin Leach 0 comment


Leave a comment

Your email address will not be published. Required fields are marked *

Please note, comments must be approved before they are published

Just added to your wishlist:
My Wishlist
You've just added this product to the cart:
Go to cart page