2lb Polyurethane Pour Foam

$29.95

1:1 mix ratio by volume
Coast Guard approved for marine use
Resists water absorption
Ideal working temperature: 75 degrees
For flotation, filling gaps and voids, sound proofing and insulation
Also, great for casting, plug making, sculptures, carving, plus more!
Bonds well with multiple pours
Once fully cured, polyester, vinyl ester and epoxy resins can be used

FREE
SHIPPING

100% MONEY
BACK GUARANTEE

ONLINE
SUPPORT 24/7

Sku: 30040702040074

Description
Reviews
Additional Information
FAQ

Details:

2LB Closed Cell Pour Foam is a 2-part liquid system with a 1:1 mix ratio. It is U.S. Coast Guard approved for marine use and is great for use in dock floats and boat parts. It is an expanding polyurethane foam. Once it is cured, the foam prevents moisture and absorption and will not be affected by solvents, oil or gas. The waterproof foam sealant will have a buoyancy of approximately 80 pounds per cubic foot, and a density of 2.0 lbs/ft3. This product does not contain any CFC blowing agent or other Ozone depleting chemicals.

Uses:

-Flotation

-Insulation

-Soundproofing

-Filling gaps and voids

Application:

-Ideal working temperature is 75-77°F

-Wear appropriate safety clothing.

-Pour equal amounts of Pour Foam B into Pour Foam A

-Mix vigorously for about 30 seconds, either by hand or machine

-Pour foam will start foaming after 45 seconds and will completely expand in 7 minutes

-Once mixture begins to look cloudy, it should be poured immediately

-Once fully cured, foam can be cut or sanded as well as coated with polyester, vinyl ester or epoxy resins

Available Sizes:

Quart Kit (2 pints), ½ Gallon kit (2 quarts), 2 Gallon kit

Handling and Storage:

Store in tightly sealed containers in temperatures above 65°F

WARNING: This product can expose you to chemicals including Ethylene Glycol which is known to the State of California to cause developmental problems. For more information go to www.P65Warnings.ca.gov

Works very well

Mix enough and do in small batches.

Super highly efficient product.

Don’t forget to use drill driver to mix the components, 30 sec approximately. It helps to get enormous volume of the foam.

Did what I expected.

Good stuff. Did what I expected.

Great

Using to restore my uncle boat, product worked get better than expected

Worked pretty good in my boat

This was the first pour foam I’ve ever used and it seemed to work great in my boat. I will have to get more to finish my boat so I will update this once all the foam is poured. So far so good though.

1 2 3

DOWNLOAD: TDS | SDS A Side | SDS B Side

Question: How much volume does the 2 gallon kit create?

Answer: The 2 gallon kit creates a total of 8 cubic feet.

Question: Can I pour all at once or should I do it in batches?

Answer: I would do it in quart batches. It is tough to mix 2 gallons at once before some of it starts to cream.

Question: Does this foam adhere to the surface it is applied to?

Answer: It sticks to most things unless there is mold release, silicone, or oils used to keep it from bonding. Make sure to wear protective gear because it will stick to clothes, skin etc.