Neil, co-founder of RNS Artistic Concepts, sent us these pictures of a custom hot tub they manufactured using our epoxy resin and fiberglass cloth. They tiled over the fiberglass and resin, creating a beautiful hot tub. It turned out great! Thanks for sharing! SHOP NOW! Save Save

Join us in the latest installment of our educational series as we break down the essential lingo of fiberglass craftsmanship. Whether you're a seasoned professional looking to brush up on your terminology or a novice eager to start your first project, this series is your go-to resource for becoming fluent in...

One or our customers, Chet, sent us these pictures of his PT109 project. Here is a few things he said about his great looking RC boat- The hull, deck and cabin is made from 3/16" balsawood. The hull was fiberglassed with your fabric and a resin I had on hand....

To fully understand the composite processes, it is important to be familiar with the "lingo" used. Over the next couple of weeks we will be discussing commonly used words in the composite/fiberglass world. Composite- A combination of fiberglass and resin. Fiberglass fabric (including chopped strand mat, carbon fiber, aramid, and...

It is important to use a roller or squeegee when working with fiberglass and resin. They are used to evenly saturate the fabric, help get rid of air pockets and also get rid of the excess resin in the fabric.  If you have too much resin, spots without resin or...

Bill, one of our customers, makes amazing sculptures.  He is a great artist. He uses fiberglass in his process. Here is what he has to say- "I make large outdoor sculptures. My work has been featured in shows from Key West FL to Connecticut, and as far west as Topeka,...

Welcome to the anticipated Part 2 of our fiberglass mold making series! In this post, we continue our dive into the intricate world of fiberglass mold making, taking you through every step from the application of fiberglass and resin, through the crucial stage of removing the plug, and finally, to...

Take a look at this beautiful sea kayak built by one of our awesome customers. Our customer Paul said, "17 feet long mahogany with glass on the inside and out, glass tape on the inside seams using epoxy. Worked great, tape and glass went on perfect and was easy to...

Dive into the world of fiberglass mold making with our new series. In Part 1, we guide you through the initial stages of creating a high-quality mold, beginning with plug preparation and culminating in the application of the tooling gel coat. Whether you're a seasoned professional looking to refine your techniques...

One of our awesome customers, Kevin, sent us these pictures of his latest fiberglass project. The project was the customization of a 2006 Chevy Corvette. Below is a brief summary of Kevin's construction method: 1. Drill many small holes in the body panel to be modified. 2. Shape the design...

  It is very important to take the time to use a mold release on your mold or plug.  It will add several hours to a project but is well worth it.  A mold release, also known as a parting agent, is used to allow parts to be easily removed...

Fillers are often added to resin to make a putty.  One filler can be added or several depending on what outcome is desired. Fillers can reduce or increase weight, improve sanding properties, prevent sag on vertical surfaces, fill gaps in fabric weave, improve bonding properties, add strength etc. It is...