6 lb Polyurethane Pour Foam

6 LB Closed Cell Pour Foam is a 2-part liquid system with a 1:1 mix ratio.  It is U.S. Coast Guard approved for marine use and is great for use in dock floats and boat parts. It is an expanding polyurethane foam.  Once it is cured, the foam prevents moisture and absorption and will not be affected by solvents, oil or gas.  The waterproof foam sealant will have a buoyancy of approximately 80 pounds per cubic foot, and a density of 6.0 lbs/ft3. This product does not contain any CFC blowing agent or other Ozone depleting chemicals.

Uses:

-Flotation

-Insulation

-Soundproofing

-Filling gaps and voids

Application:

-Ideal working temperature is 75-77°F

-Wear appropriate safety clothing.

-Pour equal amounts of Pour Foam B into Pour Foam A

-Mix vigorously for about 30 seconds, either by hand or machine

-Pour foam will start foaming after 45 seconds and will completely expand in 7 minutes

-Once mixture begins to look cloudy, it should be poured immediately

-Once fully cured, foam can be cut or sanded as well as coated with polyester, vinyl ester or epoxy resins

Available Sizes:

Quart Kit (2 pints), ½ Gallon kit (2 quarts), 2 Gallon kit

Handling and Storage:

Store in tightly sealed containers in temperatures above 65°F

WARNING: This product can expose you to chemicals including Ethylene Glycol which is known to the State of California to cause developmental problems. For more information go to www.P65Warnings.ca.gov