Orca Seal Mold Sealer

Orca Seal Mold Sealer

Partall Paste #2

Partall Paste #2

Partall Film #10

  • Water soluble film
  • Mold release
  • Recommended for separation between polyester or epoxy resins and mold surfaces
  • NOT recommended for use with substrates containing water or giving off water during cure
  • Often used with Partall #2 paste wax
  • Ships within one business day
$14.95
Availability: In stock
SKU
254
 
PARTALL Film #10 is a water/alcohol-based Polyvinyl Alcohol (PVA) solution of water-soluble film forming materials. It is particularly recommended as a parting agent for separation between polyester or epoxy resins and various mold surfaces. PARTALL Film #10 is not recommended for use with resins containing water or giving off water during cure (i.e. phenolics) or with automotive finishes as damage may occur. PARTALL Film #10 will not shrink or pull away from corners or curved surfaces. Film parts easily from mold surface and is readily dissolved from molded parts and spray equipment with water. An occasional coating of PARTALL Paste #2 is suggested for most mold surfaces prior to application of PARTALL Film #10.
Write Your Own Review
You're reviewing:Partall Film #10
Partall Film #10 SDS
(Size: 127.6 KB)
Partall Film #10 TDS
(Size: 115.6 KB)